A-A-50211A
streaks, checks, shakes, wanes, holes exceeding 1/16 inch in diameter, and knots exceeding 1/2 inch in average diameter. Holes shall be filled and knots shall be sound and tight. Knots in clusters will not be permitted. Slope of grain shall not exceed 1 inch in 10 inches in the wider dimension of the rod and shall not exceed 1 inch in 30 inches in the narrow dimension of the rod. The wood shall not be warped or bowed.
Part number. The part number for the rods, stadia shall be as follows:
AA50211 – X
AA50211 = Document number
X = Type I or II
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Packaging and packing. Military packaging shall be specified when shipments are to overseas Department of Defense (DoD) consignees. Commercial packaging may be specified for shipments to DoD consignees within the Continental United States and to non-DoD consignees worldwide. When a supplier’s normal packaging will satisfy the requirements for military packaging, it may be used.
Military packaging. Each level rod shall be preserved and packed to protect against physical damage deterioration in a logistic environment characterized by the following:
1. Multiple handling during transportation and in-transit storage.
2. Shock, vibration, and static loading forces during worldwide shipment by all transport modes.
3. Uncontrolled warehouse storage for extended periods.
4. Weather exposure during shipment and in-transit transfers.
5. Stacking loads during shipment and storage.
Quantities of stadia rod of like description destined to a single addressee may be unitized into one or more unit loads.
Commercial. Each stadia rod shall be packaged in accordance with the supplier’s normal method for retail distribution. Individually packaged compasses shipped to a single destination may be unitized to permit handling as a single unit. Shipping containers shall comply with Uniform Freight Classification or National Motor Freight Classification rules.
Marking. Unit, intermediate (when provided), and exterior packs shall be marked with the item nomenclature, stock or part, quantity per pack, and contract number as a minimum; additional marking shall be as specified in the contract or order. Exterior packs shall have an addition the complete consignee’s address. Markings shall be applied in a legible manner, in a contrasting color, of an appropriate size, and of waterproof materials.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business