A-A-52024
North sight. The sight attached to the north end of the compass box shall fold through 180 degrees ±10 degrees with a tip that folds 60 degrees ±7 degrees upward from open position. The tip shall be 0.375 – inch long ±0.03125-inch. The rear sight shall be 2.75-inch long ±0.0625-inch, including the folding tip.
Workmanship. The magnetic compasses shall have a uniform unmarred finish. Each component shall be constructed to facilitate an accurate fit of mating parts. Internal and external parts shall be free from residue of fabrication and shall be free of any defects which affect serviceability or appearance.
Certification of commercial item. The contractor shall furnish certification for Government approval that the product offered to the Government meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product as the manufacturer’s current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met.
If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable.
The contracting officer has the option of accepting or rejecting the product.
Quality assurance: The magnetic compasses hall be examined for the following defects. Presence of one or more defects shall be cause for rejection.
1. Design not as specified.
2.Ttype not as specified.
3. Class not as specified.
4. Style not as specified.
5. Dial marking not as specified.
6. Material not provided.
7. Compass not provided.
8. Magnetic needle not as specified.
9. Jacob’s staff not as specified.
10. Ball and socket joint or ball and socket head not as specified.
11. Carrying case not as specified.
12. Tolerances not as specified.
13. Packaging and marking not as specified.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business