A-A-52046
Steel wire. The arrow sets shall be manufactured from cold-drawn round steel wire between 0.1875-inch and 0.25-inch diameter, with a minimum Rockwell “B” hardness number of 85.
Metal. The metal shall be corrosion resistant or coated to be made corrosion resistant.
Treatment and painting. The arrow sets shall be cleaned, treated, and painted. The finish coat shall be enamel. The color of the arrow ring shall be either gloss red or alternate bands of gloss white and gloss red not less than 1-inch nor more than 2 inches wide. The color of the arrow shank shall be either gloss white or alternate bands of gloss white and gloss red not less than 1-inch wide. The color of the carrier ring shall be gloss white or plated.
Identification marking: The arrow sets shall be identified with manufacturer’s identification.
Workmanship: The arrow sets shall be cleaned, treated, and painted. External surfaces shall be free from nonfunctional sharp edges and projecting points.
Certification of commercial item. The contractor shall certify that the product offered to the Government meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product as the manufacturer’s current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met.
If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable.
The contracting officer has the option of accepting or rejecting the product.
Quality assurance: The parallel rulers (rolling) shall be examined for the following defects. Presence of one or more defects shall be cause for rejection.
1. Design not as specified.
2. Type not as specified.
3. Length not as specified.
4. Material not as specified.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business