A-A-52301
thermosetting waterproof resin adhesive and with recessed steel fasteners at intervals of not less than 1 foot. The exposed grain ends of these boards shall be banded.
Finish. All fabricated wood and plastic surfaces shall be sanded smooth and shall be free of cracks, splits, and splintered edges.
Protective finishing. The drawing boards shall be protected at a minimum with one coat, and the trestle wood surface with two coats or regular bleached white 4.5 lb. cut shellac.
Workmanship. Drawing hands and trestles shall be free from defects and imperfections which might affect their serviceability.
Certification of commercial item. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers’ own drawings, specifications, standards, and quality assurance practices and is the same product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met.
If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable.
The contracting officer has the option of accepting or rejecting the product.
Quality assurance. The drawing board and drawing board trestles shall be examined for the following defects. Presence of one or more defects shall be cause for rejection.
1. Design not as specified.
2. Type not as specified.
3. Size not as specified.
4. Material not as specified.
5. Construction not as specified.
6. Finish not as specified.
7. Protective finish not as specified.
8. Workmanship not as specified.
9. Packaging, marking not as specified.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business