A-A-2576 - Scale, Area (Transparent Plastic)
This description covers transparent plastic scales for measuring and estimating areas of land and for use in map estimating of land and shall be furnished in two types, as specified: Type I - Circle and grid method Type II - Dotted square method
A-A-50201 - Compass, Drafting, Pivot, Drop Spring Bow, Pen & Pencil, With Case
A-A-50203 - Compass, Drafting, Beam
This commercial item description covers beam compasses intended for use in drawing the arcs of large circles.
A-A-50204 - Divider, Drafting, Proportional
This description covers a divider, drafting, proportional, consisting of a type I for lines and circles, and a type II for any ratio between 1:1 and 1:10.
A-A-50205 - Spline And Weights Set
A-A-50206 - Ruler, Drafting, Adjustable Curve
This description covers adjustable curve rulers intended for use in drawing smooth, regular, and irregular curved lines with a ruling pen, or drafting pencil.
A-A-50207 - Microscope, Optical: Monocular, Fixed-Focus, Pocket-Type, Between 40X And 60X Magnification
A-A-50208 - Protractor, Rectangular
This description covers aprotractor for use in laying out angles and distances in sketching and in note keeping for surveys.
A-A-50209 - Straightedges, Steel, Draftsmen'S
This description covers straightedges used in general drafting practices for scaling and drawing straight lines.
A-A-50210 - Rods, Level, Philadelphia
This description covers Philadelphia-type level rods and targets with a seperate marking strip which are components of survey equipment and are intended for use as self-reading or target rods for measuring vertical distances from a horizontal line of sight.
A-A-50211 - Rods, Stadia (Folding)
This description covers two types of folding stadis rods: Type I - decimal - English graduations, and Type II metric graduations.
A-A-50212 - Parallel Rulers, Folding Type
This description covers stepping or folding parallel rulers used in general drafting and navigation to draw and lay out parallel lines.
A-A-50213 - Curves, Drafting, Regular And Irregular: Curve Sets, Drafting, Regular And Irregular; French, Mechanical Engineers, Railroad, And Ships
This description covers drafting curves and drafting curve sets for use in general drafting and drawing work.
A-A-50215 - Planimeter, Polar, Compensating, With Case
A-A-50216 - Alidades, Surveying: Telescope, With Case
This commercial item description covers alidades used for stadia surveying, including measuring distances and determining elavations.
A-A-50217 - Pens, Lettering, Scriber-Template: Reservoir
This description covers pens intended for use with template, guides, or a scriber to produce engineering drawing, technical illustrations, artwork, and lettering.
A-A-50227 - T-Squares (Metal, Wood, And Plastic)
This description covers wood and plastic T-squares used in general drafting practice and layout work and allows for ordering of a metal construction where a heavy and rigid T-square is desired.
A-A-52001 - Planetables, Surveying, With Tripod And Carrying Case
This commercial item description covers both an 18-x-24 inch and a 24-x-31 inch planetable board (457.2 X 609.6 mm and 609.6 X 787.4 mm), extension-leg tripod with a Johnson movement head and a carrying case for each size of planetable board.
A-A-52002 - Level, Circular, Rod
This description covers circular levels to indicate the plumb of level rods and range poles.
A-A-52003 - Measurer, Map
This commercial item description covers the instruments necessary for measuring the curvilinear distance on maps.
A-A-52004 - Rods Set, Level
This commercial item description covers rods set, level (in pairs) intended for use in obtaining precise vertical control of 2nd order accuracy.
A-A-52005 - Altimeter/Barometer, Pocket Size, With Case
This description covers pocket-size altimeter/barometers that measure both barometric pressure and altitude. The altimeter/barometer is intended for use in general engineering and surveying.
A-A-52006 - Plotter, Digital
This CID covers a multi-color, digital plotter capable of handling single sheet or roll media, with transport/storage case. This digital plotter will be used to create Computer-Assisted Design (CAD) system engineering drawings.
A-A-52023 - Target Set, Surveying
This commercial item description contains the functional, performance, and design characteristics required of a target set used as a sighting object for theodolites in the conduct of field surveys (i.e. traverse, triangulation, azimuth observations) at accuracies of Second Order or lower.
A-A-52024 - Compass, Magnetic: Surveyor'S And Transit, Pocket; With Optional Ball And Socket Joint Or Ball And Socket Head, And Jacob'S Staff
This description covers two types of magnetic compasses, and includes the optional ball and socket joint, or ball and socket head, and Jacob's staff. Type I compasses are intend for use in topographical surveying field work done by the U.S. Forest Service. Type II compasses are used in geology and survey reconnaissance.
A-A-52025 - Levels, Surveying: Abney Type
This description covers two types of Abney surveying levels used for measuring land slope in degrees or percent of grade and for topographic surveying.
A-A-52031 - Drawing Board, Illuminated, Portable
This description covers illuminated portable drawing boards used by personnel to produce engineering drawings, schematics, or other graphic arts.
A-A-52034 - Drafting Instrument Sets And Drafting Instruments
This specification covers four drafting instrument sets, and individual drafting instruments. The drafting instruments are intended for use by architects, engineers, scientists and draftsmen for general drafting practice.
A-A-52035 - Protractor, One Arm: Semicircular (Corrosion-Resistant Alloy, With Case
This description covers levels used for making differential elevation measurements in surveying and in other engineering applications.
A-A-52036 - Level, Surveying, Self-Leveling, And Tilting
This commercial item description covers levels (instruments) used for taking differential elevation measurements, in surveying and other engineering applications. The complete instrument shall consist of an internal focusing telescope capable of 360 degree rotation, image lens system, cross hairs (horizontal and vertical), leveling system, tripod, and accessories.
A-A-52040 - Stereoscopes, Lens, Aerial Photograph Interpretation (Pocket
This description covers two-power and four-power magnifying-lens pocket stereoscopes.
A-A-52041 - Case, Computer Supplies, Carrying
This commercial item description covers a carrying case for computer supplies.
A-A-52042 - Scale, Plotting Coordinate: Plastic, Graduated In Yards And Meters In 1:25000 And 1:50000 Scales
This description covers a flat, double-sided plastic, L-shaped coordinate scale, graduated in yards and meters in 1:25000 and 1:50000 scales with one side marked in yards and the opposite side marked in meters. The scale is intended to be used for reading and plotting coordinates on either scale maps, or map substitutes, having either a 1000 meter or 1000 yard grid.
A-A-52043 - Parallel Rulers (Rolling)
This description covers rolling parallel rulers. The roller assembly consists of an axle, two rollers, and two bearing standards near the end of the base. The axle, suspended between the standards, is free to rotate. The attached rollers, one at each end of the axle, turn with the axle and protrude slightly below the base. The rollers areknurled, scored, or grooved to prevent slipping when the ruler is guided over a drafting surface.
A-A-52044 - Pole, Range, Metal, With Case
This description covers one type of range pole containing two sections of steel tubing. The assembled length of the range pole is 6.50 feet. Its intended use is to present a view for an instrument operator sighting a straight, relatively narrow line extending vertically above the point which marks a survey station.
A-A-52045 - Tension Handle, Steel Measuring Tape, Surveyor'S
This description covers a spring-scale tension handle for use with a surveyor's measuring tape.
A-A-52046 - Arrow Sets, Surveying
This description covers surveyors' arrow sets, each consisting of 11 arrows and a carrying ring.
A-A-52049 - Tripod, Surveying: For Range Pole
This description covers a lightweight metal folding tripod used in general surveying operations to support a range pole. It may also be used to support a signal light or other surveying equipment.
A-A-52050 - Protractors, Semicircular, Plastic, Graduated In Mils, Yards, Meters And Inches
This description covers semicircular and plastic protractors for use in machine gun and artillery fire control.
A-A-52297 - Table, Photointerpreter And Analyst, Illuminated, Split Stage
This description covers an illuminated table for viewing and annotating photographic film for photointerpreting and analysis purposes.
A-A-52298 - Tripod, Surveying: Extension-Leg-Type
This CID covers an extension-leg type tripod to mount and support surveying instruments for use.
A-A-52299 - Level, Surveying: Locator'S, Hand-Type
This commercial item description covers hand held, surveying levels used for line of sight determination of relative elevation.
A-A-52300 - Protractors, Circular And Semicircular, (Mils, Degrees)
This description covers circular protractors of plastic and semicircular protractors of brass or plastic for use in graphically measuring precise angles required by mapping and precision drafting techniques.
A-A-52301 - Drawing Board And Drawing Board Trestles
This description covers drawing boards and drawing board trestles of various sizes, to be used for drafting, layout or military projection applications.
A-A-52304 - Lettering Sets And Accessories
This description covers drafting equipment consisting of lettering sets and accessories.
A-A-52314 - Template, Drafting: Map Symbol, For Plastic Scribing
This commercial item description covers a transparent, plastic, drafting template.
A-A-843 - T-Square (Wood, Wood And Plastic, Steel And Plastic)
GG-A-440 - Alidades, Surveying: Telescope
GG-A-470 - Alimeter, Surveying
GG-C-00500 - Compass, Drafting, Pivot, Drop Spring, Bow, Pen And Pencil.
GG-C-552 - Compass, Drafting, Pivot, (Non-Professional Grade)
GG-C-560 - Compasses, Magnetic: Surveyor'S And Transit, Pocket; With Optional Ball Joint And Jacob'S Staff (S/S By A-A-52024)
GG-C-871 - Curves, Drafting, Re Ular And Irregular: Curve Sets, Drafting, Regular And Irregular. (S/S By A-A-50213)
GG-C-871/1 - Curves, French (Irregular), Set Or Individul (Use A-A-50213)
This specification sheet covers the specific requirements of French curves.
GG-C-871/2 - Curves, Mechanical Engineers (Irregular), Set (Use A-A-50213)
GG-C-871/3 - Curves, Railroad (Regular), Set Or Individual (Use A-A-50213)
GG-C-871/4 - Curves, Ship (Irregular) Set Or Individual (S/S By A-A-50213)
GG-D-475 - Divider, Spacing, Equal
GG-D-600 - Drafting Instrument Sets: And Drafting Instruments (S/S By A-A-52034)
GG-D-635 - Drawing Board And Drawing Board Trestles (S/S By A-A-52301)
GG-L-00410 - Line Guide, Lettering, Adjustable
GG-L-1680 - Level, Surveying, Mounted Type, Dumpy Style
GG-L-256 - Lettering Sets And Accessories (S/S By A-A-52304)
GG-L-260 - Level, Surveying: Abney Type (S/S By A-A-52025)
GG-L-261 - Levels, Surveying: Locators, Hand-Type (S/S By A-A-52299)
GG-M-181 - Measurer, Map (S/S By A-A-52003
GG-P-118 - Parallel Rulers, Folding Type (S/S By A-A-50212)
This specification covers parallel rulers with wood blades or plastic blades of the stepping or folding type.
GG-P-125 - Pen, Ruling, Draftman'S: Contour Swivel Action
This specification covers a swivel-action, spring-blade contour pen of the professional grade or quality.
GG-P-133 - Pen, Ruling, Draftsman, Railroad, Swivel Blade, 5-Inch
This specification covers one type of swivel-blade railroad ruling pen used in drafting work for drawing double-line railroad and road symbols.
GG-P-136 - Pen, Ruling, Draftsman'S: Spring Blade Type: Flat Handled, 6 Inch
GG-P-140 - Pen, Lettering, Scriber Template (S/S By A-A-50217)
GG-P-664 - Projector, Vertical Reflecting, Photogrammetric, (Portable, Auto-Focus)
GG-P-681 - Protractors, Circular And Semicircular, (Mils, Degrees) (S/S By A-A-52300)
This specification covers circular protractors of plastic and semicircular protractors of brass or plastic for mapping and precision drafting.
GG-R-1506 - Rods, Level: Philadelphia (S/S By A-A-50210)
GG-R-550 - Rods, Stadia Folding, With Case (S/S By A-A-50211)
This specification covers two types and one style of folding stadia rods.
GG-S-150 - Scale, Area (Transparent Plastic) (S/S By A-A-2176)
This specification covers transparent plastic scales for measuring and estimating areas of land in feet, rods, acres or miles and fractions thereof, and for use in map estimating of land in agriculture and soil conservation.
GG-S-161/10 - Scale, Plotting, Meter And Yard (S/S By A-A-59269)
GG-S-161/11 - Scale, Plotting, Soil Survey
GG-S-161/12 - Scale, Drafting, Enlarging
> GG-D-635 - Drawing Board And Drawing Board Trestles (S/S By A-A-52301)
GG-L-00410 - Line Guide, Lettering, Adjustable
GG-L-1680 - Level, Surveying, Mounted Type, Dumpy Style
GG-L-256 - Lettering Sets And Accessories (S/S By A-A-52304)
GG-L-260 - Level, Surveying: Abney Type (S/S By A-A-52025)
GG-L-261 - Levels, Surveying: Locators, Hand-Type (S/S By A-A-52299)
GG-M-181 - Measurer, Map (S/S By A-A-52003
GG-P-118 - Parallel Rulers, Folding Type (S/S By A-A-50212)
This specification covers parallel rulers with wood blades or plastic blades of the stepping or folding type.
GG-P-125 - Pen, Ruling, Draftman'S: Contour Swivel Action
This specification covers a swivel-action, spring-blade contour pen of the professional grade or quality.
GG-P-133 - Pen, Ruling, Draftsman, Railroad, Swivel Blade, 5-Inch
This specification covers one type of swivel-blade railroad ruling pen used in drafting work for drawing double-line railroad and road symbols.
GG-P-136 - Pen, Ruling, Draftsman'S: Spring Blade Type: Flat Handled, 6 Inch
GG-P-140 - Pen, Lettering, Scriber Template (S/S By A-A-50217)
GG-P-664 - Projector, Vertical Reflecting, Photogrammetric, (Portable, Auto-Focus)
GG-P-681 - Protractors, Circular And Semicircular, (Mils, Degrees) (S/S By A-A-52300)
This specification covers circular protractors of plastic and semicircular protractors of brass or plastic for mapping and precision drafting.
GG-R-1506 - Rods, Level: Philadelphia (S/S By A-A-50210)
GG-R-550 - Rods, Stadia Folding, With Case (S/S By A-A-50211)
This specification covers two types and one style of folding stadia rods.
GG-S-150 - Scale, Area (Transparent Plastic) (S/S By A-A-2176)
This specification covers transparent plastic scales for measuring and estimating areas of land in feet, rods, acres or miles and fractions thereof, and for use in map estimating of land in agriculture and soil conservation.
GG-S-161/10 - Scale, Plotting, Meter And Yard (S/S By A-A-59269)
GG-S-161/11 - Scale, Plotting, Soil Survey
GG-S-161/12 - Scale, Drafting, Enlarging
GG-S-161/13 - Scale, Drafting; Metric Proportional
GG-S-161/1 - Scale, Drafting, Architect S (S/S By A-A-59269)
GG-S-161/2 - Scale, Drafting, Engineers
GG-S-161/3 - Scale, Drafting, Mechanical
GG-S-161/4 - Scale, Drafting, Combination English And Metric Measurement System (S/S By A-A-59269)
GG-S-161/5 - Scale, Drafting Surveyor S (S/S By A-A-59269)
GG-S-161/6 - Scale, Drafting, Decimal-Inch Dimensioning
GG-S-161/7 - Scale, Plotting (S/S By A-A-59269)
GG-S-161/8 - Scale, Plotting, Metric (S/S By A-A-59269)
GG-S-161/9 - Scale, Plotting, Feet And Yards
GG-S-161 - Scales, Drafting, And Scales, Plotting (General Specification) (S/S By A-A-59269)
GG-S-710 - Stakes, Surveyors, Metal
GG-S-771 - Striaghtedge, Parallel Ruling, Guide Cord
GG-S-773 - Straightedge: Plastic And Wood
GG-S-776 - Straightedges, Steel, Draftmen'S (S/S By A-A-50209)
GG-T-00673 - Triangles, Drafting, Adjustable; (Plastic) (S/S By Gg-T-671)
GG-T-1830 - Templates, Drafting, Office Layout
GG-T-1837 - Template, Drafting Flowchart, (Automatic Data Processing, Federal Information Processing System)
This specification covers Federal Information Processing Standard (FIPS), Automatic Data Processing (ADP), Flowchart Template.
GG-S-161/13 - Scale, Drafting; Metric Proportional
GG-S-161/1 - Scale, Drafting, Architect S (S/S By A-A-59269)
GG-S-161/2 - Scale, Drafting, Engineers
GG-S-161/3 - Scale, Drafting, Mechanical
GG-S-161/4 - Scale, Drafting, Combination English And Metric Measurement System (S/S By A-A-59269)
GG-S-161/5 - Scale, Drafting Surveyor S (S/S By A-A-59269)
GG-S-161/6 - Scale, Drafting, Decimal-Inch Dimensioning
GG-S-161/7 - Scale, Plotting (S/S By A-A-59269)
GG-S-161/8 - Scale, Plotting, Metric (S/S By A-A-59269)
GG-S-161/9 - Scale, Plotting, Feet And Yards
GG-S-161 - Scales, Drafting, And Scales, Plotting (General Specification) (S/S By A-A-59269)
GG-S-710 - Stakes, Surveyors, Metal
GG-S-771 - Striaghtedge, Parallel Ruling, Guide Cord
GG-S-773 - Straightedge: Plastic And Wood
GG-S-776 - Straightedges, Steel, Draftmen'S (S/S By A-A-50209)
GG-T-00673 - Triangles, Drafting, Adjustable; (Plastic) (S/S By Gg-T-671)
GG-T-1830 - Templates, Drafting, Office Layout
GG-T-1837 - Template, Drafting Flowchart, (Automatic Data Processing, Federal Information Processing System)
This specification covers Federal Information Processing Standard (FIPS), Automatic Data Processing (ADP), Flowchart Template.
GG-T-35 - Tables; Drawing, Tracing, And Scribing
This specification covers drawings, tracing and scribing tables.
GG-T-621 - Transit, One Minute, And Transit Tripods
GG-T-671/1 - Triangles, Drafting, Plastic, Transparent
GG-T-671/2 - Triangle, Line Guide, Lettering, Nonadjustable, Plastic
GG-T-671/3 - Triangle, Drafting, Adjustable, Plastic
GG-T-671/4 - Triangles, Drafting: Steel, Open Center
GG-T-671/5 - Triangle, Drafting, Steel, Bead Supports And Lifting Knob
GG-T-671/6 - Line Guide, Lettering, Adjustable, Plastic
GG-T-671 - Triangles, Drafting: Line Guides, Lettering, Adjustable, And Nonadjustable (General Specification)
GG-T-711 - T-Square, Plastic, Wood, And Wood And Plastic (S/S By A-A-843)
JAN-P-90 - Protractor, Three Arm, Transparent, Mark 2 (S/S By Mil-P-288)
MIL-A-10526 - Astrolabe, Pendulum, 60-Degree, With Tripod And Carrying Case
MIL-A-13170 - Altimeter, Surveying, 4,500 Meters, 2 Meter Divisions
MIL-A-14215 - Astronomical Azimuth Attachment, Transit Theodolite
MIL-A-20357 - Arming Delay, Air Travel, M1, Metal Parts For
MIL-A-20383 - Arrow Sets, Surveying (S/S By A-A-52046)
This specification covers surveyors' arrow sets, each set consisting of 11 arrows and a carrying ring.
MIL-A-20663 - Alidate, Surveying, Open Sight, Folding (S/S By Gg-A-440)
MIL-A-2402 - Adapter, Stereoplotter Projector, Tilt, With Condenser Clip (For Multiplex)
This specification covers a tilt adapter and a condenser clip for wide-angle multiplex projectors.
MIL-A-3565 - Alidade, Triangular (Scale) Surveying (Boxwood, 81/2- Inch)
MIL-A-708 - Alidade, Surveying, Telescopic (Use Gg-A-440)
MIL-B-11582 - Base Plate, Theodolite: Aluminum
This specification covers an aluminum-alloy base plate with three springs for mounting theodolites.
MIL-B-12686 - Board, Plotting, M10
MIL-B-52808 - Boxes, Storage, Photomapping, Paper Roll
This specification covers three types of paper roll storage boxes.
MIL-C-10085 - Cutter, Photogrammetric, Slotted-Templet: Hand-Operated
This specification covers a hand-operated punch with chest. The punch accurately die cuts radial slots about a common center hole.
MIL-C-10320 - Cover, Level Rod, Philadelphia, Canvas
This specification covers a canvas cover for the Philadelphia-type level rod.
MIL-C-10541 - Cooling Unit, Stereoplotter Projection
This specification covers a cooling unit for use with stereoplotter projectors.
MIL-C-11288 - Curves, Irregular, Plastic (Use Gg-C-871)
MIL-C-11347 - Case, Battery And Lighting Accessory, For Surveying Equipment.
This specification covers a battery case complete with connector cord and plugs, and a lighting accessory case complete with miniature incandescent electric lamps and a connector cord with plugs.
MIL-C-12103 - Computer, Stadia, Circular Scale
This specification covers a plastic, circular slide rule graduated for stadia computations.
MIL-C-14324 - Cartographic Section, Topographic Mapping Set, Truck-Mounted
MIL-C-14353 - Copy And Supply Section, Topographic Mapping Set, Truck Mounted, Equipment Installation In
MIL-C-1772 - Case, Carrying, Drawing Board, For Plane Table, 24 X 31 Inches Field Artillery
MIL-C-20634 - Case, Drawing Board And Planetable Board 15- By 20- Inch
MIL-C-3544 - Curve, Drafting (For Mechanical Engineers) (Plastic, Set Of 10) (Use Gg-C-871)
MIL-C-3625 - Curve, Railroad (Set Of 30) ( Use Gg-C-871)
MIL-C-3635 - Compasses, Drafting, Beam (S/S By A-A-50203)
This specification covers beam compasses, with micrometer adjustment, in cases.
MIL-C-3779 - Case, Engineer Battalion, Drafting Equipment, Canvas
This specification covers a canvas carrying case for engineer battalion drafting equipment.
MIL-C-52206 - Case, Scribing Points And Parts: Plastic, Indexed
This specification covers two types of plastic cases which protect and identify scribing points and parts.
MIL-C-52273 - Case, Photographic Interpretation Kit (Use Mil-I-52295)
MIL-C-52359 - Chest, Surveying Set, General Purpose, Planimetric, Construction, And Topographic Surveys
MIL-C-52370 - Case, Computer Supplies, Carrying (S/S By A-A-52041)
MIL-C-52381 - Case, Supplementary Drafting Equipment Set, Wood, Carrying
MIL-C-52389 - Collimator, Vertical, Surveying
MIL-C-52468 - Case, Plotting Equipment, Carrying
MIL-C-52668 - Cartographic Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-C-52669 - Copy And Supply Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-C-52819 - Cover, Set, Multiplex Equipment
This specification covers a set of covers for multiplex equipment.
MIL-C-759 - Clinometers, Elevation And Depression, Surveying (Use Mil-L-52336)
MIL-D-11381 - Drafting Equipment Set, Topographic Battalion, Headquarters And Service Company;Packaging Of
This specification covers the requirements for the preservation, packing, and marking of Drafting Equipment Set, Topographic Battalion, Headquarters and Service Company, SC 6675-97-CL-E03 (NSN 6675-00-641-3615).
MIL-D-12817 - Drafting Equipment Set, Battalion, Set 1, Packaging Of
MIL-D-14320 - Drafting Machine, Scales And Straightedges
MIL-D-29002 - Drafting Equipment Set, Combat
MIL-D-3333 - Drafting Equipment Set, Company (Set 2), Packaging Of
MIL-D-3335 - Drafting Equipment Set, Regiment (Set 3), Packaging Of
MIL-D-3467 - Dividers, Drafting, Proportional (S/S By A-A-50204)
MIL-D-3898/1 - Drafting Machine And Scales, Chuck Plate For
MIL-D-3898/2 - Drafting Machine And Scales, Insert For
MIL-D-3898/3 - Drafting Machine And Scales, Scale Assembly
MIL-D-3898/4 - Drafting Machine And Scales Range-Time-Speed Plotting Scale 200 And 1,000 Yards Per Inch
MIL-D-3898/5 - Drafting Machine And Scales Range-Time-Speed Plotting Scale 500 And 2,000 Yards Per Inch
MIL-D-3898/6 - Drafting Machine And Scales, Range-Time-Speed Plotting Scale 25,000:1 And 50,000:1 Yards Ratio
MIL-D-3898 - Drafting Machine And Scales General Specification For
This specification covers drafting machines and includes scales used to transfer a straight line at any angle, from any part of a drawing or chart, so that it will remain parallel to its original direction.
MIL-D-52609 - Data Recorder, 2 Channel, Portable
MIL-D-52665 - Drafting Equipment Set, Topographic Battalion, Photomapping Company, Packaging Of
This specification covers the requirements for preservation, packaging, packing, and marking of a Drafting Equipment Set, Topographic Battalion, Photomapping Company (SC6675-93-CL-E04).
MIL-D-52975 - Drawing Board, Illuminated, Portable (S/S By A-A-52031)
This specification covers a portable illuminated drawing board.
MIL-D-8513 - Drawings And Data Lists, Preparation Of For Special Support Equipment (For Aeronautical And Associated Equipment) (S/S By Mil-D-70327)
MIL-F-10538 - Frames, Stereoplotter Projection, Multiplex (Single And Double) With Case
MIL-F-14614 - Frame And Table Assembly, Stereoplotter Projection: Multiplex, 32-Inch Length, With Chest
This specification covers a 32-inch multiplex frame with table, blower, voltage, controls, and chest.
MIL-F-55001 - Forming Machine, Thermoplastic Relief Map, Heat & Vacuum.
MIL-H-14123 - Height Finder, Oblique Photograph, Photogrammetric, 50 Degrees To 70 Degrees Range Of Tilt, 9- By 9- Inch Photographs, With Case
This specification covers an instrument complete with case for use in the determination of ground elevations from high oblique stereoscopic aerial photographs by parallax measurement principles.
MIL-H-20194 - Heliotrope, Surveying, Box-Type, With Case
This specification covers a box-type heliotrope with carrying case.
MIL-H-3537 - Holder, Slotted Template Stud (Floating Control Point)
MIL-H-5353 - Height Finder, Continuous Strip, Stereoscopic, Aerial Photographic, Type A-1
MIL-I-11894 - Instruments, Drawing, In Sets
MIL-I-22598 - Interpretation Kit, Photographic, Pocket-Size Bs-5( )
This specification covers the requirements for one (1) type of pocket photographic interpretation kit, containing viewing and measuring instruments, for use in the field.
MIL-I-52295 - Interpretation Kit, Photographic, Army Type (See Notice 1 For Replacement Information)
MIL-I-9576 - Interpretation Kit, Photograph Bs-2 ( ) (Use Mil-I-9900)
MIL-I-9900 - Interpretation Kit, Photographic Bs-2()
MIL-L-11566 - Level, Level Rod (Use A-A-52002)
MIL-L-20388 - Level, Surveying, Locators, Hand Type (Use Gg-L-261)
MIL-L-20662 - Light, Signal, Surveying, Electric, With Case And Strap (5-Inch Reflector) (S/S By Mil-L-52430)
MIL-L-28590 - Levels, Surveying, Self Leveling (S/S By Mil-L-52918)
MIL-L-3384 - Light, Signal, Surveying, Electric (Reflector Diameter Approximately 2 Inches) With Case And Strap (S/S By Mil-L-52430)
MIL-L-3765 - Level, Surveying, Mounted Type, Dumpy Style (S/S By Gg-L-1680)
MIL-L-3841 - Level, Surviving, Engineer, With Accessories And Tripod (Use Mil-L-52918)
MIL-L-52056 - Light, Signal, Surveying, Self Illuminated, With Carrying Case, For Use With Range Pole
MIL-L-52336 - Level, Surveying, Abney (Use Gg-L-260)
MIL-L-52430 - Lights, Signal, Surveying: 2-Inch And 5-Inch Reflectors, Battery-Powered, With Cases
This specification covers two sizes of battery-powered surveying signal lights with cases.
MIL-L-52918 - Levels, Surveying, Self Leveling And Tilting (S/S By A-A-52036)
MIL-M-14354 - Map-Revision Section, Topographic Mapping Set, Truck-Mounted
MIL-M-14525 - Multiplex Section, Topographic Mapping Set, Truck-Mounted
MIL-M-20382 - Marker And Point Selector,, With Case
MIL-M-52673 - Map Revision Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-M-52677 - Multiplex Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-M-81428 - Map Preparation Set, Navigational An/Gsq-109
MIL-N-3497 - Nadirscope, Stereoplotter Tracing Table
MIL-N-634 - Navigator'S, Plotting Instrument Set And Plotting Instruments (S/S By A-A-59373)
MIL-P-10562 - Projector, Stereoplotter, Wide-Angle, Vertical, Multiplex Mapping Equipment (Set Of Three Projectors In A Case With Accessories)
This specification covers a set of three vertical, wide-angle, stereoplotter projectors with accessories and a case.
MIL-P-10813 - Planetables, Surveying, With Tripod And Carrying Case (Use A-A-52001 For Procurement
MIL-P-11166 - Plotter, Radial&Line, Photogrammetic Trimetrogon, Oblique 9&By 9&Inch Photographs, With Accessories And Case
MIL-P-11411 - Projector, Vertical Reflecting, Photogrammetric (Autofocus)
MIL-P-11720 - Protractor, Rectangular (Plastic, 1-3/4 Inches By 6 Inches (Future Procurement Made Under A-A-50208)
MIL-P-11801 - Pen, Contour , Swivel Blade (Use Gg-P-125)
MIL-P-12105 - Packaging Of Compasses And Optical Instruments, (Surveying) Overseas Shipment
MIL-P-14250 - Pin, Straight, Headed And Pin, Straight, Headless, Slotted Templet Stud
MIL-P-14257 - Printer, Reduction, Stereoplotter, Multiplex
MIL-P-14325 - Photomapping Section, Topographic Mapping Set, Truck Mounted
MIL-P-14474 - Point, Scribing Instrument, Cartographic
MIL-P-15008 - Plotting And Status Boards (Edge-Lighted)
MIL-P-17930 - Pantograph
MIL-P-20192 - Pole, Range, Metal, With Case (S/S By A-A-52044)
This specification covers one type of range pole containing two sections of steel tubing. The assembled length of the range pole is 6-1/2 feet.
MIL-P-20385 - Protractors, Semicircular, Plastic, Graduated In Mils, Yards, Meters, And Inches (S/S By A-A-52050)
MIL-P-20664 - Planimeter, Polar, Compensating, With Case (S/S By A-A-50215)
This specification covers compensating polar planimeters which are utilized for measuring areas of a plane figure by tracing optically observing its boundary lines.
MIL-P-26446 - Photoalidade, Photogrammetric Ncu&2( )-U
MIL-P-2719 - Protractor, One Arm, Semicircular (Plastic) (S/S By Mil-P-288)
MIL-P-288 - Protractors One Or Three Arm (S/S By A-A-59478)
This specification covers protractors with one or three movable arms used in position, plotting, and hydrographic surveying.
MIL-P-3535 - Packaging Of Set Eng 6 No. 430-09 Drafting Equipment, Set No. 9, Field Artillery Sound Ranging, Overseas Shipment
MIL-P-3548 - Pantograph, Precision
MIL-P-3631 - Parallel Rulers, (Rolling) (S/S By A-A-52043)
MIL-P-3756 - Protractor, One-Arm: Semicircular (Corrosion-Resistant Alloy, With Case) (S/S By A-A-52035)
MIL-P-4378 - Plotter, Underwater Depth, Oblique Aerial Photograph, Type A&1 (Supersedes 31444)
MIL-P-4519 - Parallel, Bar And Box Type, Cast Iron And Steel (Supersedes 50241)
MIL-P-52281 - Processing Machine, Photogrammetric Diapositive Plates
MIL-P-52307 - Plotter, Rectangular Coordinates: (Coordinatograph)
This specification covers two types of precision plotters.
MIL-P-52455 - Pin Register Punch Boards, Pin Register Bars, And Pin Register Plates
MIL-P-52650 - Plotting Instrument Set, Stereoplotter, Multiplex Laboratory, Packaging Of
MIL-P-52674 - Photomapping Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-P-52981 - Planimeter, Polar, Compensating, With Case (S/S By A-A-52563)
MIL-P-9588 - Plotter, Radial Line, Photogrammetric, Rectoblique Type
MIL-PRF-52955 - Improved Position And Azimuth Determining System (Ipads)
This specification covers an improved position and azimuth determining system, which is an inertial surveying system that may Global Positioning System (GPS) aided.
MIL-R-10639 - Rectifier, Projection Printing, Photogrammetric, For 9&1/2&Inch Aerial Roll Film, Horizontal Projection, 0 To 70 Degree Tilt, With Chests
MIL-R-10916 - Rods, Level, Geodetic (S/S By A-A-52004)
MIL-R-11254 - Rectifier, Projection Printing, Photogrammetric. 9&1/2 Inch Aerial Roll Film, Vertical Projection, O To 20 Degree Tilt, With 0.7 To 3.3 Magnification At 20 Degree Tilt, Autofocusing
MIL-R-11429 - Repair Kit, Stereoplotter, Projection, Supplementary Multiplex Equipment And Repair Parts, Packaging Of
MIL-R-12715 - Rule, Slide, M1
MIL-R-3360 - Rod, Stadia (12-Foot, Folding* )Superseded By Gg-R-550(
MIL-R-3378 - Rod, Level, Philadelphia (Use Gg-R-1506)
MIL-R-3471 - Rulers, Drafting, Adjustable Curve Refer To (A-A-50206)
This specification covers adjustable curve rulers.
MIL-R-52004 - Rectifier Section, Topographic Mapping Set, Truck-Mounted
MIL-R-52221 - Rectifier, Projection Printing, Photogrammetric, 9 By 18 Inches
MIL-R-52676 - Rectifier Section, Topographic Mapping Set, Truck Mounted, Packaging Of
MIL-S-0053046 - Surveying Equipment, Electronic Distance Measuring, Medium-Range, (Sedme-Mr)
MIL-S-10145 - Sketchmaster, Vertical, With Case
This specification covers one type of vertical sketch-master, complete with case.
MIL-S-10539 - Spectacles, Anaglyphic, Stero-Plotter, Mapping Equipment (Red And Cyan Lenses, With Case)
This specification covers spectacles for viewing projections in near-complementary colors made by multiplex projectors.
MIL-S-10987 - Scale, Plotting, Coordinate (Plastic, Square, 1:25,000 Scale And 1:50,000 Scale, Graduated In Meters) (S/S By A-A-52042)
MIL-S-11039 - Slotted Template, Radial Arm, Photogrammetric Set
This specification covers an assortment of slotted template arms, arm clamps, bolts, nuts, washers, pins, studs, and tools which make up a slotted template set, and a chest to contain the various components.
MIL-S-11256 - Scale, Plotting, Trangular, Boxwood, 12-Inch-Length, General Purpose (Use Gg-S-161/7)
MIL-S-11779 - Scale, Meteorological, Ml-125( ), Ml-177( ), And Ml-301( )/Tm
This specification covers the following meteorological scales: Scale ML-125( ), Scale ML-177( ), Scale ML-301( )/TM.
MIL-S-12623 - Stereoplotter, Projection, Topographic, With Table And Cases (S/S By Mil-S-52180)
MIL-S-12811 - Sketching Set, Surveying, Set No. 1, Packing Of
MIL-S-12991 - Surveying Set, Topographic Company; Packaging Of
MIL-S-13224 - Survey Set, Supplementary Equipment, Topographic Battalion, Set No. 15, Packaging Of
This specification covers preservation, packaging, and packing of the component items of Topographic Battalion, Supplementary Equipment, Surveying Set No.15.
MIL-S-14197 - Stud, Photogrammetric, Slotted Templet
MIL-S-14249 - Straightedge, Radial Line, Slotted Template
MIL-S-14540 - Scriber, Drafting, Cartographic, And Accessory Equipment
MIL-S-19410 - Surveying Equipment, Miscellaneous (Use Mil-A-20383 And Mil-P-20192)
MIL-S-19866 - Scale, Plotting, Meterological, Plastic
MIL-S-20197 - Scale, Plotting, Precision, Centimeters And Inches With Case
This specification covers a metal, precision calibrating and measuring scale graduated in centimeters and inches, and a carrying case.
MIL-S-20379 - Scale, Plotting, And Scales, Drafting Boxwood, Flat
MIL-S-20384 - Stretcher, Basic Line Tape, With Accessories And Chest
MIL-S-20386 - Stereometer, Photogrammetric: Stereocomparagraph-Type; With Accessories And Case
> GG-D-635 - Drawing Board And Drawing Board Trestles (S/S By A-A-52301)
GG-L-00410 - Line Guide, Lettering, Adjustable
GG-L-1680 - Level, Surveying, Mounted Type, Dumpy Style
GG-L-256 - Lettering Sets And Accessories (S/S By A-A-52304)
GG-L-260 - Level, Surveying: Abney Type (S/S By A-A-52025)
GG-L-261 - Levels, Surveying: Locators, Hand-Type (S/S By A-A-52299)
GG-M-181 - Measurer, Map (S/S By A-A-52003
GG-P-118 - Parallel Rulers, Folding Type (S/S By A-A-50212)
This specification covers parallel rulers with wood blades or plastic blades of the stepping or folding type.
GG-P-125 - Pen, Ruling, Draftman'S: Contour Swivel Action
This specification covers a swivel-action, spring-blade contour pen of the professional grade or quality.
GG-P-133 - Pen, Ruling, Draftsman, Railroad, Swivel Blade, 5-Inch
This specification covers one type of swivel-blade railroad ruling pen used in drafting work for drawing double-line railroad and road symbols.
GG-P-136 - Pen, Ruling, Draftsman'S: Spring Blade Type: Flat Handled, 6 Inch
GG-P-140 - Pen, Lettering, Scriber Template (S/S By A-A-50217)
GG-P-664 - Projector, Vertical Reflecting, Photogrammetric, (Portable, Auto-Focus)
GG-P-681 - Protractors, Circular And Semicircular, (Mils, Degrees) (S/S By A-A-52300)
This specification covers circular protractors of plastic and semicircular protractors of brass or plastic for mapping and precision drafting.
GG-R-1506 - Rods, Level: Philadelphia (S/S By A-A-50210)
GG-R-550 - Rods, Stadia Folding, With Case (S/S By A-A-50211)
This specification covers two types and one style of folding stadia rods.
GG-S-150 - Scale, Area (Transparent Plastic) (S/S By A-A-2176)
This specification covers transparent plastic scales for measuring and estimating areas of land in feet, rods, acres or miles and fractions thereof, and for use in map estimating of land in agriculture and soil conservation.
GG-S-161/10 - Scale, Plotting, Meter And Yard (S/S By A-A-59269)
GG-S-161/11 - Scale, Plotting, Soil Survey
GG-S-161/12 - Scale, Drafting, Enlarging
GG-S-161/13 - Scale, Drafting; Metric Proportional
GG-S-161/1 - Scale, Drafting, Architect S (S/S By A-A-59269)
GG-S-161/2 - Scale, Drafting, Engineers
GG-S-161/3 - Scale, Drafting, Mechanical
GG-S-161/4 - Scale, Drafting, Combination English And Metric Measurement System (S/S By A-A-59269)
GG-S-161/5 - Scale, Drafting Surveyor S (S/S By A-A-59269)
GG-S-161/6 - Scale, Drafting, Decimal-Inch Dimensioning
GG-S-161/7 - Scale, Plotting (S/S By A-A-59269)
GG-S-161/8 - Scale, Plotting, Metric (S/S By A-A-59269)
GG-S-161/9 - Scale, Plotting, Feet And Yards
GG-S-161 - Scales, Drafting, And Scales, Plotting (General Specification) (S/S By A-A-59269)
GG-S-710 - Stakes, Surveyors, Metal
GG-S-771 - Striaghtedge, Parallel Ruling, Guide Cord
GG-S-773 - Straightedge: Plastic And Wood
GG-S-776 - Straightedges, Steel, Draftmen'S (S/S By A-A-50209)
GG-T-00673 - Triangles, Drafting, Adjustable; (Plastic) (S/S By Gg-T-671)
GG-T-1830 - Templates, Drafting, Office Layout
GG-T-1837 - Template, Drafting Flowchart, (Automatic Data Processing, Federal Information Processing System)
This specification covers Federal Information Processing Standard (FIPS), Automatic Data Processing (ADP), Flowchart Template.
MIL-S-20660 - Stereoscope, Lens-Prism-Mirror, Aerial Photograph Interpretation (With Binoculars And Case) (S/S By A-A-52564)
This specification covers a mirror stereoscope with binoculars and a carrying case.
MIL-S-2410 - Sketchmaster, Oblique, 60-Deg., Plotting Scale Range 1/4 To 1, With Chest
This specification covers a 60-degree depression angle oblique sketchmaster with chest. The sketchmaster is a means for transferring planimetric detail from 9- by 9-inch , 60-degree, oblique, aerial photographs to a base sheet or map manuscript. The sketchmaster has a plotting range of 0.25 to 1 times the isoline scale of the photography.
MIL-S-2412 - Scale, Plotting, Coordinate: Plastic, Graduated In Yards And Meters In 1:25000 And 1:5000 Scales (S/S By A-A-52042)
MIL-S-3404 - Surveying Set, Precise Baseline: Specialized Set For First-Order Accuracy, Packaging Of
MIL-S-3405 - Surveying Set, Planetable, Set 8, Packaging Of
MIL-S-3419 - Shop Equipment, Cartographic Instrument Repair, Field Maintenance, Packaging Of
This specification covers the requirements for materials, methods, and procedures for the preservation, packaging, and packing of SHOP EQUIPMENT, CARTOGRAPHIC INSTRUMENT REPAIR, FIELD MAINTENANCE sc6675-93-CL-E12. (FSN 6675-641-3623 or FSN 6675-926-1243 for MAP use).
MIL-S-3422 - Surveying Set, Precise Traversing, Set 11, Packaging Of
MIL-S-3425 - Surveying Set, Precise Leveling: For Spirit Leveling Of Second-Order Accuracy, Packaging Of
MIL-S-3470 - Spline And Weights Set
MIL-S-3534 - Surveying Instruments And Accessories, Packaging Of
MIL-S-3629 - Stereoscopes, Lens, Aerial Photograph Interpretation (Pocket) (S/S By A-A-52040)
MIL-S-3720 - Sketching Board, With Waterproof Cover, Tripod Mounting
This specification covers a wooden sketching board with built-in compass, a waterproff cover, and a folding extension tripod.
MIL-S-4307 - Stereoscope, Folding Type
MIL-S-52094 - Surveying Instrument, Azimuth, Gyro, Artillery (Use Mil-S-52252)
MIL-S-52119 - Surveying Instrument, Electronic&Optical, Distance Measuring, 30&Kilometer Range
MIL-S-52156 - Surveying Set, Electronic Distance Measuring Microwave
MIL-S-52175 - Surveying Set, Mobile Control Section
MIL-S-52180 - Stereoplotter, Projection. High Precision, With Table And Chests
MIL-S-52201 - Scale, Plotting, Range-Time-Speed, Plastic (S/S By Mil-D-3898)
MIL-S-52256 - Surveying Instrument; Azimuth Gyro, Lightweight (S/S By A-A-52565)
MIL-S-52362 - Surveying Set, General-Purpose: For Planimetric Construction And Topographic Surveys, Packaging Of
MIL-S-52365 - Surveying Set, Artillery-Fire-Control: Fourth-Order, Packaging Of
MIL-S-52541 - Surveying Set: Triangulation Reconnaissance, Specialized; Packaging Of
MIL-S-52548 - Surveying Set, Triangulation: Principal Observer And Signal Tender, Packaging Of
MIL-S-52561 - Supplementary Equipment Set, Topographic Photomapping, Packaging Of
MIL-S-52697 - Surveying Control Section, Truck Mounted, Packaging Of
MIL-S-52729 - Surveying Set, Astronomic Position, Packaging Of
MIL-S-52781 - Strip: Marking, Aluminum
MIL-S-52792 - Survey Set, Hydrology, Packaging Of
MIL-S-52848 - Surveying Instrument, Distance Measuring, Medium Range, Infrared (S/S By Mil-S-53046)
MIL-S-53046 - Surveying Equipment, Electronic Distance Measuring, Medium Range, (Sedme-Mr)
MIL-S-5700 - Structural Criteria, Piloted Airplanes (S/S By Mil-A-8860)
MIL-S-7607 - Scale, Gradient Wind
MIL-T-10540 - Tracing Table, Stereoplotter, Projection: With Case
This specification covers a multiplex stereoplotter tracing table with case.
MIL-T-10629 - T-Squares, (Steel) (S/S By A-A-50227)
This specification covers steel T-squares used in drafting, layout, and reproduction work.
MIL-T-10792 - Taping Stool
MIL-T-11372 - Trivets, Surveying Instrument
This specification covers two sizes of trivets on which surveying theodolites are mounted.
MIL-T-11674 - Tripod, Surveying, For Range Pole (S/S By A-A-52049)
MIL-T-11752 - Tensile Handle, Steel Measuring Tape, Surveyor'S (S/S By A-A-52045)
MIL-T-11984 - Table, Tracing, 24- By 36-Inch Ground Glass Top With Fluorescent Illumination.
MIL-T-12533 - Theodolite Ph-( )-33
MIL-T-12612 - Theodolite Mount Ml-180-( )
This specification covers one type of equipment designated as Theodolite Mount ML-180-( ).
MIL-T-13702 - Truck, Van, For Reproduction Equipment, Camera Section 24-By 30-Inch (For Chassis,Truck,2 1/2-Ton,6By6,M46)
MIL-T-14091 - Tripod, Surveying: Extension-Leg-Type (S/S By A-A-52298)
MIL-T-14132 - Theodolites, Surveying, Direction: Second Order (S/S By A-A-52574)
MIL-T-14159 - Table, Drawing, Tracing, Drafting Drawing And Scribing,
MIL-T-14282 - Tribach With Optical Plummet And Base Plate
MIL-T-20193 - Table, Stereoplotter, Projection: Multiplex, With Chest
MIL-T-20196 - Transits, Engineers, Night&Illuminated,With Accessories And Tripods
MIL-T-20198 - Triangle, Drafting, Steel, Open Center (Use Gg-T-671/4)
MIL-T-3368 - Tripod, M19
MIL-T-3510 - Target, Surveying, Beacon (With Carrying Bag) (S/S By A-A-52571)
MIL-T-3538 - Triangles, Drafting (Corrosion-Resisting Steel, 6-Inch, With Bead Supports And Lifting Knob) (No S/S By Document)
MIL-T-52015 - Template, Drafting: Map Symbol, For Plastic Scribing (S/S By A-A-52314)
MIL-T-52035 - Theodolites, Surveying, Direction, First-Order, With Accessories, Tripod, And Cases (S/S By A-A-52575)
MIL-T-52114 - Theodolites, Surveying, Directional; Third Order (S/S By A-A-52573)
MIL-T-52115 - Theodolite, Surveying: Directional, Astronomical, 0.1 Second, With Accessories, Tripod, And Cases
MIL-T-52316 - Table, Tracing, Drafting, Portable, Illuminated (S/S By Gg-T-35)
MIL-T-52331 - Target, Surveying, Level Rod
MIL-T-52806 - Table, Vehicular-Mounted, Flat Top, 2 Drawer
MIL-T-52820 - Table, Drawing Steel
This specification covers a steel drawing table.
MIL-T-52823 - Target Set, Surveying (S/S By A-A-52023)
MIL-T-52956 - Test Set, Position And Azimuth Determining System, An/Usm-427
MIL-T-52957 - Test Set, Power Supply, For Position And Azimuth Determining System, An/Usm-428
MIL-T-52964 - Topographic Support System (Tss): Operation, Storage And Retrieval, Distribution, Drafting Support, Compilation, Survey, Rectifier I, Rectifier Ii, Mosaicking/Drafting, Collection, Analysis, Information And Synthesis Sections, Semitrailer Mounted, General Specification For
This specification covers the general requirements for 13 Topographic Support System (TSS) sections. Each section consists of: a semitrailer (chassis); International Standardization Organization (ISO) container (van body) with air conditioning, heating, and utilities, installed and equipment and materials listed in the applicable set listing mounted therein.
MIL-T-52964/1 - Topographic Support System (Tss): Operations Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/10 - Topographic Support System (Tss): Collection Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/11 - Topographic Support System (Tss): Analysis Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/12 - Topographic Support System (Tss): Information Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/13 - Topographic Support System (Tss): Synthesis Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/2 - Topographic Support System (Tss): Storage And Retrieval Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/3 - Topographic Support System (Tss): Distribution Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/4 - Topographic Support System (Tss): Drafting Support Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/5 - Topographic Support System (Tss): Compilation Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/6 - Topographic Support System (Tss): Survey Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/7 - Topographic Support System (Tss): Rectifier I Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/8 - Topographic Support System (Tss): Rectifier Ii Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52964/9 - Topographic Support System (Tss): Mosaicking/Drafting Section, Topographic Support Set, Semitrailer Mounted
MIL-T-52965 - Topographic Support System (Tss): Direct Support Section, Truck Mounted
MIL-T-52991 - Table, Scribing, Tracing, Drafting: Flip Top
MIL-T-52993 - Table, Photointerpreter And Analyst, Illuminated, Split Stage (S/S By A-A-52297)
This specification covers an illuminator for viewing and annotating photographic film negatives and positives for photo interperting and analysis purposes.
MIL-T-9967 - Template, Flow Chart, Plastic, Aflc Data System
MIL-V-23583 - Viewer, Stereo, Scanning, Zoom Lenses, 5 Inch Film
MS16885 - ( Images) Chuck Plate For Drafting Machine Scales (Use Mil-D-3898/1)
MS39115 - ( Images) Trestle, Drawing Board (23 X 31 Inch Drawing Board) (S/S By A-A-52301)
MS39116 - ( Images) Trestle, Drawing Board (31 X 42 Inch Drawing Board) (S/S By A-A-52301)
MS39117 - ( Images) Trestle, Drawing Board (36 X 48 Inch Drawing Board) (S/S By A-A-52301)
MS39118 - ( Images) Trestle, Drawing Board (38 X 48, 43-1/2 X 60-72-84, 60 X 120 Inch Drawing Boards) (S/S By A-A-52301)
MS39123 - ( Images) Drawing Boards-Desk Type I-Ii-Iii (S/S By A-A-52301)
MS39124 - ( Images) Drawing Boards Type Ii-Iii-Iv (S/S By A-A-52301)
MS39213 - Range-Time-Speed Plotting Scale 200 And 1,000 Yards Per Inch (S/S By Mil-D-3898/4)
MS39214 - Range-Time-Speed Plotting Scale 500 And 2,000 Yards Per Inch (S/S By Mil-D-3898/5)
MS39215 - Range-Time-Speed Plotting Scale 25,000:1 And 50,000:1 Yards Ratio (S/S By Mil-D-3898/6)
QPL-15008-1 - Plotting And Status Boards (Edge-Lighted)
QPL-52848-4 - Surveying Instruments, Distance Measuring, Short Range (Ir)
> GG-D-635 - Drawing Board And Drawing Board Trestles (S/S By A-A-52301)
GG-L-00410 - Line Guide, Lettering, Adjustable
GG-L-1680 - Level, Surveying, Mounted Type, Dumpy Style
GG-L-256 - Lettering Sets And Accessories (S/S By A-A-52304)
GG-L-260 - Level, Surveying: Abney Type (S/S By A-A-52025)
GG-L-261 - Levels, Surveying: Locators, Hand-Type (S/S By A-A-52299)
GG-M-181 - Measurer, Map (S/S By A-A-52003
GG-P-118 - Parallel Rulers, Folding Type (S/S By A-A-50212)
This specification covers parallel rulers with wood blades or plastic blades of the stepping or folding type.
GG-P-125 - Pen, Ruling, Draftman'S: Contour Swivel Action
This specification covers a swivel-action, spring-blade contour pen of the professional grade or quality.
GG-P-133 - Pen, Ruling, Draftsman, Railroad, Swivel Blade, 5-Inch
This specification covers one type of swivel-blade railroad ruling pen used in drafting work for drawing double-line railroad and road symbols.
GG-P-136 - Pen, Ruling, Draftsman'S: Spring Blade Type: Flat Handled, 6 Inch
GG-P-140 - Pen, Lettering, Scriber Template (S/S By A-A-50217)
GG-P-664 - Projector, Vertical Reflecting, Photogrammetric, (Portable, Auto-Focus)
GG-P-681 - Protractors, Circular And Semicircular, (Mils, Degrees) (S/S By A-A-52300)
This specification covers circular protractors of plastic and semicircular protractors of brass or plastic for mapping and precision drafting.
GG-R-1506 - Rods, Level: Philadelphia (S/S By A-A-50210)
GG-R-550 - Rods, Stadia Folding, With Case (S/S By A-A-50211)
This specification covers two types and one style of folding stadia rods.
GG-S-150 - Scale, Area (Transparent Plastic) (S/S By A-A-2176)
This specification covers transparent plastic scales for measuring and estimating areas of land in feet, rods, acres or miles and fractions thereof, and for use in map estimating of land in agriculture and soil conservation.
GG-S-161/10 - Scale, Plotting, Meter And Yard (S/S By A-A-59269)
GG-S-161/11 - Scale, Plotting, Soil Survey
GG-S-161/12 - Scale, Drafting, Enlarging
GG-S-161/13 - Scale, Drafting; Metric Proportional
GG-S-161/1 - Scale, Drafting, Architect S (S/S By A-A-59269)
GG-S-161/2 - Scale, Drafting, Engineers
GG-S-161/3 - Scale, Drafting, Mechanical
GG-S-161/4 - Scale, Drafting, Combination English And Metric Measurement System (S/S By A-A-59269)
GG-S-161/5 - Scale, Drafting Surveyor S (S/S By A-A-59269)
GG-S-161/6 - Scale, Drafting, Decimal-Inch Dimensioning
GG-S-161/7 - Scale, Plotting (S/S By A-A-59269)
GG-S-161/8 - Scale, Plotting, Metric (S/S By A-A-59269)
GG-S-161/9 - Scale, Plotting, Feet And Yards
GG-S-161 - Scales, Drafting, And Scales, Plotting (General Specification) (S/S By A-A-59269)
GG-S-710 - Stakes, Surveyors, Metal
GG-S-771 - Striaghtedge, Parallel Ruling, Guide Cord
GG-S-773 - Straightedge: Plastic And Wood
GG-S-776 - Straightedges, Steel, Draftmen'S (S/S By A-A-50209)
GG-T-00673 - Triangles, Drafting, Adjustable; (Plastic) (S/S By Gg-T-671)
GG-T-1830 - Templates, Drafting, Office Layout
GG-T-1837 - Template, Drafting Flowchart, (Automatic Data Processing, Federal Information Processing System)
This specification covers Federal Information Processing Standard (FIPS), Automatic Data Processing (ADP), Flowchart Template.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business